Montag, 18. Dezember 2017

December  03, 2008

09:00Forum of National Aerospace NDT Boards

Wintergarten
13:00Open Meeting of the Forum of National Aerospace NDT Boards (Agenda)

Lecture Hall "Kleiner Saal"
18:00Champagne Reception at Fraunhofer EZRT

Visit to Fraunhofer EZRT

December  04, 2008

08:00Reception and Registration
09:00Introduction

Lecture Hall "Kleiner Saal"
09:15 (collapse) Ultrasound
Session Chair: R. Oster, Airbus Helicopters, Donauwörth, Germany

Lecture Hall "Kleiner Saal"
1
09:15
Characterization of Aerospace Materials by Using Air-Coupled Guided Waves, Birefringent and Nonlinear Ultrasound
I. Solodov, Universität Stuttgart, Germany
G. Busse, Universität Stuttgart, Germany
2
09:35
Advanced Solutions for UT of Aircraft Engine Run Hardware
S. Rabinovich, ScanMaster Systems, Kfar Saba, Israel
S. Saitowitz, ScanMaster Systems (IRT), Kadima, Israel
C. Köhler, VOGT Ultrasonics, Burgwedel, Germany
3
09:55
Application of Sampling Phased Array Technique for Ultrasonic Inspection of CFRP Components
A. Bulavinov, Fraunhofer IZFP, Saarbrücken, Germany
J. Hegemann, Airbus DS, München, Germany
R. Oster, Airbus Helicopters, Donauwörth, Germany
R. Hanke, Fraunhofer IIS, EZRT, Fürth, Germany
S. Pudovikov, Fraunhofer IZFP, Saarbrücken, Germany
R. Sridaran Venkat, Fraunhofer IZFP, Saarbrücken, Germany
K.M. Reddy, Lucid Software, Chennai, India
M. Kröning, Q-NET Engineering, Saarbrücken, Germany
4
10:15
Implementation of Innovative Ultrasound CFRP-Inspection Systems for Industrial Applications
G. Engl, Erlangen, Germany
T. Rehfeldt, AREVA, Erlangen, Germany
R. Meier, Erlangen, Germany
S. Gripp, GE Sensing & Inspection Technologies, Alzenau, Germany
5
10:35
Advanced Ultrasonic NDT of Aero Engine Components using Validated Simulation Techniques
M. Spies, Fraunhofer IZFP, Saarbrücken, Germany
10:55Coffee Break
11:15 (collapse) Thermography
Session Chair: G. Busse, Universität Stuttgart, Germany

Lecture Hall "Kleiner Saal"
6
11:15
Infrared Thermography: Principle and Applications to Aircraft Materials
X. Maldague, University Laval , Quebec City, Canada
W. Ben Larbi, Université Laval, Québec City, Canada
A.H. Bendada, Université Laval, Québec City, Canada
M. Grenier, Université Laval, Québec City, Canada
M. Klein, Université Laval, Québec City, Canada
J.-M. Piau, Université Laval, Québec City, Canada
M. Susa, Université Laval, Québec City, Canada
C. Ibarra-Castanedo, University Laval , Quebec City, Canada
7
11:35
State of the Art in Thermal Imaging
A. Dillenz, edevis, Stuttgart, Germany
G. Zenzinger, MTU Aero Engines, München, Germany
8
11:55
NDI of Safety Relevant Aerostructures by Use of Portable Ultrasound Excited Thermography
M. Hauf, Airbus Helicopters, München, Germany
R. Stößel, Airbus Group Innovations, Ottobrunn, Germany
9
12:15
Active Thermography for Quantitative Analysis of Defects in Composites
G. Hendorfer, University of Applied Sciences Upper Austria, Wels, Austria
G. Mayr, University of Applied Sciences Upper Austria, Wels, Austria
10
12:35
Aerospace Applications of Lockin-Thermography with Optical, Ultrasonic, and Inductive Excitation
C. Spießberger, edevis, Stuttgart, Germany
G. Busse, Universität Stuttgart, Germany
A. Gleiter, Universität Stuttgart, Germany
12:55Lunch
14:00 (collapse) X-Ray (Radioscopy, CT, Detectors)
Session Chair: R. Hanke, Fraunhofer IIS, EZRT, Fürth, Germany

Lecture Hall "Kleiner Saal"
11
14:00
The Next Generation of Photon Counting X-Ray Detectors
M. Campbell, EP Division CERN, Genf, Switzerland
G. Anton, Universität Erlangen-Nürnberg, Erlangen, Germany
12
14:20
Inline Turbine Blade Inspection
S. Neuhäusler, MTU Aero Engines, München, Germany
13
14:40
Quantitative X-ray Determination of CFRP Micro Structures
M.P. Hentschel, TU Berlin, Germany
A. Lange, BAM, Berlin, Germany
B.R. Müller, BAM, Berlin, Germany
O. Wald, BAM, Berlin, Germany
14
15:00
Mobile X-Ray Inspection of Light Weight Materials
U. Ewert, BAM, Berlin, Germany
K. Osterloh, , Germany
O. Schimmelmann, Airbus Deutschland, Stade, Germany
R. Henrich, Airbus, Bremen, Germany
U. Schnars, Airbus, Bremen, Germany
C. Rädel, BAM, Berlin, Germany
B. Redmer, BAM, Berlin, Germany
K. Bavendiek, YXLON International, Hamburg, Germany
M. Jahn, YXLON International, Hamburg, Germany
15
15:20
Radiological NDT for the Aircraft Industry
C. Bueno, GE Global Research Center, Niskayuna, USA
15:40Coffee Break
16:00 (collapse) Poster Session
Session Chair: J. Kastner, FH Oberösterreich, Wels, Austria

Lecture Hall "Kleiner Saal"
P2
16:00
Terahertz Imaging for Non-Destructive Testing
J. Jonuscheit, Fraunhofer ITWM, Kaiserslautern, Germany
R. Beigang, Fraunhofer ITWM, Kaiserslautern, Germany
M. Frank, Fraunhofer ITWM, Kaiserslautern, Germany
M. Theuer, Fraunhofer ITWM, Kaiserslautern, Germany
G. Torosyan, Fraunhofer ITWM, Kaiserslautern, Germany
P3
16:05
Detection of Micro-Cracks on Metal Surfaces Using Near-Field Microwave Dual-Behaviour Resonators
A. Le Brun, EDF R&D, Chatou Cedex, France
J. Kerouedan, EDF R&D, Chatou Cedex, France
P. Quéffélec, LabSTICC, Universite de Bretagne Occidentale, Brest, France
C. Quendo, LabSTICC, Universite de Bretagne Occidentale, Brest, France
P. Talbot, LabSTICC, Universite de Bretagne Occidentale, Brest, France
P5
16:10
Acoustic Techniques for NDT of Fibre Composite Materials
D. Hentschel, Fraunhofer IKTS, Dresden, Germany
B. Frankenstein, Fraunhofer IKTS, Dresden, Germany
L. Schubert, Fraunhofer IKTS, Dresden, Germany
F. Schubert, Fraunhofer IKTS, Dresden, Germany
P7
16:15
SHM of Aircraft Wings and Wind Turbine Rotor Blades
B. Frankenstein, Fraunhofer IKTS, Dresden, Germany
T. Klesse, Fraunhofer IKTS, Dresden, Germany
L. Schubert, Fraunhofer IKTS, Dresden, Germany
P8
16:20
Application of the Ultrasonic Guided Waves for Quality Control of CFRP Rods
R. Kazys, Kaunas University of Technology, Kaunas, Lithuania
R. Raisutis, Kaunas University of Technology, Kaunas, Lithuania
A. Vladisauskas, Kaunas University of Technology, Kaunas, Lithuania
E. Zukauskas, Kaunas University of Technology, Kaunas, Lithuania
P9
16:25
NDT of Complicated Composite Structures Using Different Ultrasonic Techniques
L. Mazeika, Kaunas University of Technology, Kaunas, Lithuania
E. Jasiuniene, Kaunas University of Technology, Kaunas, Lithuania
R. Raisutis, Kaunas University of Technology, Kaunas, Lithuania
R. Sliteris, Kaunas University of Technology, Kaunas, Lithuania
A. Voleisis, Kaunas University of Technology, Kaunas, Lithuania
E. Zukauskas, Kaunas University of Technology, Kaunas, Lithuania
P13
16:30
Non-destructive Characterization of Fibre-Filled Plastics Using Eddy Current Technique
C. Seidel, imq, Crimmitschau, Germany
M. Seidel, imq, Crimmitschau, Germany
A. Zösch, imq, Crimmitschau, Germany
L. Frormann, Steinbeis, Zwickau, Germany
A. Söver, Steinbeis, Zwickau, Germany
P14
16:35
Advanced Inspection Techniques for Life-Cycle Monitoring of Aerospace Structures
M. Perterer, TU München, Garching, Germany
H. Baier, TU München, Garching, Germany
U.C. Müller, TU München, Garching, Germany
P15
16:40
Constructing Panoramas from Thermography Phase Images to Quantify Potential Defect Growth in Large and Complex Shaped Composite Parts
C. Zöcke, EADS-IW, München, Germany
M. Hauf, Airbus Helicopters, München, Germany
A. Langmeier, EADS-IW, München, Germany
P17
16:45
High Resolution X-ray Computed Tomography for Qualitative and Quantitative Characterisation of Fibre Reinforced Polymers
D. Salaberger, FH Oberösterreich, Wels, Austria
J. Kastner, FH Oberösterreich, Wels, Austria
18:00Visit to the famous Christkindlesmarkt in Nuremberg, afterwards Dinner in the famous restaurant "Bratwurst-Röslein"

December  05, 2008

09:00 (collapse) The Project "ZeLuR"
Session Chair: U. Ewert, BAM, Berlin, Germany

Lecture Hall "Kleiner Saal"
16
09:00
Inline CT Methods for Industrial Production
U. Haßler, Fraunhofer IIS, EZRT, Fürth, Germany
I. Bauscher, Fraunhofer IIS, EZRT, Fürth, Germany
S. Oeckl, Fraunhofer IIS, EZRT, Fürth, Germany
17
09:20
Tools and Measures for High Precision Quantitative Computed Tomography (QCT) with Light Weight Composite Materials
T. Fuchs, Fraunhofer IIS, EZRT, Fürth, Germany
F. Nachtrab, Fraunhofer IIS, EZRT, Fürth, Germany
T. Schön, Fraunhofer IIS, EZRT, Fürth, Germany
18
09:40
Computed Tomography Metrology in Industrial Research & Development
S. Kasperl, Fraunhofer IIS, EZRT, Fürth, Germany
J. Hiller, Fraunhofer EZRT, Deggendorf, Germany
M. Krumm, Fraunhofer IIS, EZRT, Fürth, Germany
19
10:00
Components and Methods for Highest Resolution Computed Tomography
N. Uhlmann, Fraunhofer IIS, EZRT, Fürth, Germany
S. Burtzlaff, Fraunhofer IIS, EZRT, Fürth, Germany
R. Hanke, Fraunhofer IIS, EZRT, Fürth, Germany
F. Nachtrab, Fraunhofer IIS, EZRT, Fürth, Germany
M. Salamon, Fraunhofer IIS, Fürth, Germany
W. Johansson, Fraunhofer IZFP, Saarbrücken, Germany
F. Porsch, Fraunhofer IZFP, Saarbrücken, Germany
20
10:20
Mobile Computed Tomography
J. Hess, Fraunhofer IIS, Fürth, Germany
M. Eberhorn, Fraunhofer IIS, EZRT, Fürth, Germany
21
10:40
Multi-Modality Approaches for Complex Test Requirements
B. von Stackelberg, Fraunhofer IIS, EZRT, Fürth, Germany
T. Fuchs, Fraunhofer IIS, EZRT, Fürth, Germany
U. Haßler, Fraunhofer IIS, EZRT, Fürth, Germany
S. Hübner, Fraunhofer IIS, EZRT, Fürth, Germany
J. Mühlbauer, Fraunhofer IIS, EZRT, Fürth, Germany
L. von Bernus, Fraunhofer IIS, EZRT, Fürth, Germany
11:00Coffee Break
11:20 (collapse) Optics
Session Chair: C. Boller, Fraunhofer IZFP, Saarbrücken, Germany

Lecture Hall "Kleiner Saal"
22
11:20
Shearography NDT of Aerospace Structures
E. Moser, Dantec Dynamics, Ulm, Germany
23
11:40
Lockin Interferometry: Principle and Aerospace Applications
G. Busse, Universität Stuttgart, Germany
P. Menner, edevis, Stuttgart, Germany
H. Gerhard, Universität Stuttgart, Germany
24
12:00
ESPI of Aerospace Composites Using Digital Shearography
J. Gryzagoridis, University of Cape Town, South Africa
D. Findeis, University of Cape Town, South Africa
25
12:20
Quality Control with Shearography and Digitizing
R. Berger, Steinbichler Optotechnik, Neubeuern, Germany
12:40Lunch
13:40 (collapse) Additional NDT Applications I
Session Chair: X. Maldague, University Laval , Quebec City, Canada

Lecture Hall "Kleiner Saal"
26
13:40
New NDT Approach for Adhesive Composite Bonds
B. Valeske, htw saar, Saarbrücken, Germany
C. Bockenheimer, Airbus, Bremen, Germany
R. Henrich, Airbus, Bremen, Germany
27
14:00
NDT Applications in Fuselage Component Development Tests
R. Franke, IMA Dresden, Germany
T.-Y. Han, Fraunhofer IKTS, Dresden, Germany
N. Meyendorf, Fraunhofer IKTS, Dresden, Germany
S. Goldbach, IMA Dresden, Germany
28
14:20
The Role of the Forum for National Aerospace NDT Boards
J.R. Thompson, BINDT, Northampton, UK
29
14:40
Evaluating Low Cost Portable Shearography on Aircraft Components
D. Findeis, University of Cape Town, South Africa
J. Gryzagoridis, University of Cape Town, South Africa
B. Pitman, University of Cape Town, South Africa
15:00Coffee Break
15:20 (collapse) Additional NDT Applications II
Session Chair: G. Anton, Universität Erlangen-Nürnberg, Erlangen, Germany

Lecture Hall "Kleiner Saal"
30
15:20
State-of-the-Art in Structural Health Monitoring for Aeronautics
C. Boller, Fraunhofer IZFP, Saarbrücken, Germany
N. Meyendorf, Fraunhofer IKTS, Dresden, Germany
31
15:40
Reliability of NDT Techniques described by POD within a Modular Model - Experiences and Outlook
M. Pavlovic, BAM, Berlin, Germany
R. Henrich, Airbus, Bremen, Germany
A. Kück, Airbus, Bremen, Germany
U. Schnars, Airbus, Bremen, Germany
U. Ewert, BAM, Berlin, Germany
C. Müller, BAM, Berlin, Germany
K. Takahashi, LIAG, Hannover, Germany
32
16:00
Phased-Array-US-Testing of Aluminium Plates for Aircraft Applications - Field Report about Specifications, Calibration and Daily Use
C. Henkel, AMAG rolling, Ranshofen, Austria
A. Wienerroither, AMAG-Austria Metall, Ranshofen, Austria
16:20Closing Remarks and Discussion

Lecture Hall "Kleiner Saal"
Foyer
P1
Non Destructive Testing with Ultrasound Immersion and Contact Technique for Aerospace Applications
G. Vogt, MPV Meß- und Prüftechnik Vogt, Burgwedel, Germany
P2*
Terahertz Imaging for Non-Destructive Testing
J. Jonuscheit, Fraunhofer ITWM, Kaiserslautern, Germany
R. Beigang, Fraunhofer ITWM, Kaiserslautern, Germany
M. Frank, Fraunhofer ITWM, Kaiserslautern, Germany
M. Theuer, Fraunhofer ITWM, Kaiserslautern, Germany
G. Torosyan, Fraunhofer ITWM, Kaiserslautern, Germany
P3*
Detection of Micro-Cracks on Metal Surfaces Using Near-Field Microwave Dual-Behaviour Resonators
A. Le Brun, EDF R&D, Chatou Cedex, France
J. Kerouedan, EDF R&D, Chatou Cedex, France
P. Quéffélec, LabSTICC, Universite de Bretagne Occidentale, Brest, France
C. Quendo, LabSTICC, Universite de Bretagne Occidentale, Brest, France
P. Talbot, LabSTICC, Universite de Bretagne Occidentale, Brest, France
P4
Phased Array Inspection of Metallic Aerospace Components
D. Hentschel, Fraunhofer IKTS, Dresden, Germany
T.-Y. Han, Fraunhofer IKTS, Dresden, Germany
F. Schmidt, Fraunhofer IKTS, Dresden, Germany
P5*
Acoustic Techniques for NDT of Fibre Composite Materials
D. Hentschel, Fraunhofer IKTS, Dresden, Germany
B. Frankenstein, Fraunhofer IKTS, Dresden, Germany
L. Schubert, Fraunhofer IKTS, Dresden, Germany
F. Schubert, Fraunhofer IKTS, Dresden, Germany
P6
Chemically Activated Nanodiamonds (CANDiT) as a Corrosion Protective Coating for Al-alloys in Aircraft Manufacturing
J. Schreiber, Fraunhofer IKTS, Dresden, Germany
I. Hanstein, Fraunhofer IKTS, Dresden, Germany
J. Opitz, Fraunhofer IKTS, Dresden, Germany
V. Lapina, National Academy of Science of Belarus, Minsk, Belarus
P7*
SHM of Aircraft Wings and Wind Turbine Rotor Blades
B. Frankenstein, Fraunhofer IKTS, Dresden, Germany
T. Klesse, Fraunhofer IKTS, Dresden, Germany
L. Schubert, Fraunhofer IKTS, Dresden, Germany
P8*
Application of the Ultrasonic Guided Waves for Quality Control of CFRP Rods
R. Kazys, Kaunas University of Technology, Kaunas, Lithuania
R. Raisutis, Kaunas University of Technology, Kaunas, Lithuania
A. Vladisauskas, Kaunas University of Technology, Kaunas, Lithuania
E. Zukauskas, Kaunas University of Technology, Kaunas, Lithuania
P9*
NDT of Complicated Composite Structures Using Different Ultrasonic Techniques
L. Mazeika, Kaunas University of Technology, Kaunas, Lithuania
E. Jasiuniene, Kaunas University of Technology, Kaunas, Lithuania
R. Raisutis, Kaunas University of Technology, Kaunas, Lithuania
R. Sliteris, Kaunas University of Technology, Kaunas, Lithuania
A. Voleisis, Kaunas University of Technology, Kaunas, Lithuania
E. Zukauskas, Kaunas University of Technology, Kaunas, Lithuania
P10
Synchrotron Based Micro-CT and Refraction Enhanced Micro-CT of MMC
B.R. Müller, BAM, Berlin, Germany
M. Harwardt, BAM, Berlin, Germany
A. Lange, BAM, Berlin, Germany
M.P. Hentschel, TU Berlin, Germany
P11
X-Ray Microfocus and Nanofocus CT: 3D Microanalysis of Aerospace Materials
S. Becker, GE Sensing & Inspection Technologies, Wunstorf, Germany
O. Brunke, GE Sensing & Inspection Technologies, Wunstorf, Germany
P12
Displacement Sensor with High Accuracy for Hidden Objects
A. Zösch, imq, Crimmitschau, Germany
M. Seidel, imq, Crimmitschau, Germany
C. Seidel, imq, Crimmitschau, Germany
P13*
Non-destructive Characterization of Fibre-Filled Plastics Using Eddy Current Technique
C. Seidel, imq, Crimmitschau, Germany
M. Seidel, imq, Crimmitschau, Germany
A. Zösch, imq, Crimmitschau, Germany
L. Frormann, Steinbeis, Zwickau, Germany
A. Söver, Steinbeis, Zwickau, Germany
P14*
Advanced Inspection Techniques for Life-Cycle Monitoring of Aerospace Structures
M. Perterer, TU München, Garching, Germany
H. Baier, TU München, Garching, Germany
U.C. Müller, TU München, Garching, Germany
P15*
Constructing Panoramas from Thermography Phase Images to Quantify Potential Defect Growth in Large and Complex Shaped Composite Parts
C. Zöcke, EADS-IW, München, Germany
M. Hauf, Airbus Helicopters, München, Germany
A. Langmeier, EADS-IW, München, Germany
P16
Variable Focal-Spot Tube for Film Replacement (FR) and High-Speed CT
M. Kurfiß, Fraunhofer EMI, Efringen-Kirchen, Germany
A. Lessmann, GE Sensing & Inspection Technologies, Ahrensburg, Germany
K. Bavendiek, YXLON International, Hamburg, Germany
P17*
High Resolution X-ray Computed Tomography for Qualitative and Quantitative Characterisation of Fibre Reinforced Polymers
D. Salaberger, FH Oberösterreich, Wels, Austria
J. Kastner, FH Oberösterreich, Wels, Austria
P18
3D Characterisation and Modelling of Foam Structures
M. Spies, Fraunhofer IZFP, Saarbrücken, Germany
M. Godehardt, Fraunhofer ITWM, Kaiserslautern, Germany
C. Redenbach, Fraunhofer ITWM, Kaiserslautern, Germany
K. Schladitz, Fraunhofer ITWM, Kaiserslautern, Germany
T. Sych, Fraunhofer ITWM, Kaiserslautern, Germany
O. Wirjadi, Fraunhofer ITWM, Kaiserslautern, Germany
P19
3D Characterisation and Modelling of Fibrous Materials
M. Spies, Fraunhofer IZFP, Saarbrücken, Germany
M. Godehardt, Fraunhofer ITWM, Kaiserslautern, Germany
R. Malten, Fraunhofer ITWM, Kaiserslautern, Germany
C. Redenbach, Fraunhofer ITWM, Kaiserslautern, Germany
K. Schladitz, Fraunhofer ITWM, Kaiserslautern, Germany
T. Sych, Fraunhofer ITWM, Kaiserslautern, Germany
O. Wirjadi, Fraunhofer ITWM, Kaiserslautern, Germany
P20
The Next Generation of NDT Inspection with Shearography
J. Collrep, Dantec Dynamics, Ulm, Germany
P21
SINDBAD: a Multi-Purpose X-ray Simulation Tool for the NDT Inspection of Complex Industrial Parts
V. Rebuffel, CEA-LETI, Grenoble, France
J. Tabary, CEA-LETI, Grenoble, France
P22
3D Prec Measurement of a CFRP Component - Example of an Angular Connecting Joint
J. Bognar, Applus RTD, Wiener Neustadt, Austria
R. Dix, GMA-Werkstoffprüfung, Düsseldorf, Germany
P23
Micro-Radiographic Observation of Low Contrast Features
D. Vavrik, Institute of Theoretical and Applied Mechanics, v.v.i, Prag, Czech Republic
J. Jakubek, Institute of Experimental and Applied Physics CTU, Prag, Germany

* = Poster with short presentation on December 04th.

 

  Sponsors: